- Q: How to replacing the fuse?
- Press the fuse cover tightly while turning it counterclockwise. Take out the fuse cover and the fuse.
- Thereafter, replace the fuse with another one with the same specifications as supplied by the original manufacturer.
- Insert the fuse cover and the new fuse back in the fuse holder, and then press the cover tightly the same way while turning it clockwise.
- Eventually, turn on the machine power to check if the machine can be turned on.
-
Q: How do I maintain the machine?
A: Regularly clean and lubricate the silver rails for maintenance. -
Q: How often should the machine be maintained?
A: It is recommended to clean the worktable surface after each machining operation. Additionally, depending on the usage frequency of the machine, general maintenance for the three axes is advised every 1 to 3 months. -
Q: Does the engraving machine require calibration?
A: The mini CNC engraver undergoes calibration and quality inspection before leaving the factory. Therefore, customers do not need to perform any calibration upon receiving the machine. -
Q: Where can I download the user manual?
A: Upon receiving the product, please register on the Bravoprodigy official website following the provided procedure. After registration, you will be able to download the software from the member area.