-
Q: What code can mini CNC read?
A: G Code formats
- G Code (mm)(*.tap)
- G Code (inch)(*.tap)
- G Code Arcs(mm)(*.tap)
- G Code Arcs(inch)(*.tap)
- BravoProdigy CNC (mm) (*.tap)
- BravoProdigy CNC (inch) (*.tap)
- BravoProdigy CNC Arcs (mm) (*.tap)
- BravoProdigy CNC Arcs (inch) (*.tap)
-
Q: How much wattage does the mini CNC require?
A: The power consumption of BE2216/ BE3000 is approximately 15 watts in standby mode. GM150 is under 1 watts.The power consumption may vary depending on the user's usage patterns, increasing or decreasing accordingly. -
Q: How long is the warranty for the mini CNC?
A: IMCNC 2-year Limited Warranty
IMCNC Warranty Policy -
Q: Is mini CNC maintenance easy?
A: Regularly clean and lubricate the silver rails for maintenance. -
Q: Can mini CNC be rented?
A: IMCNC currently do not offer rental plans.
-
Q: Is a mini CNC engraver the same as a laser engraving machine?
A: No, a mini CNC engraver and a laser engraving machine are not the same, the processing methods, advantages, and presented works are all different.P.S. Our mini CNC comes with a three-in-one module, which can be purchased as needed. IMCNC Three-in-One Module -
Q: mini CNC only carve flat artworks?
A: Flat carving, relief, and cutting are all possible. -
Q: I have never worked with a mini CNC before. Will it be easy for me to learn?
A: Our mini CNC engravers are child-friendly and family-friendly.
The mini CNC operating interface is more intuitive, complemented by a controller similar to a joystick or gamepad, making it easy for first-time users to get the hang of it. -
Q: What is the range size that machines can engrave?
A: Each of our mini CNC has corresponding specifications.
BE2216. 22cm*16cm
BE3030. 30cm*30cm -
Q: What about the applicable materials?
A: Please refer to this web page.
IMCNC Router Tool Bits Suggest Engraving Materials -
Q: How to choose cutting tool bits?
A: Choose the tool bits diameter based on the level of detail in the design. -
Q: When to use which cutting tool bits?
A: We will provide the specifications for the tool bits, and you can preview the carving effect by selecting the appropriate tool bits in Vectric software. -
Q: Can the IMCNC Engraver's tool bits only purchase from IMCNC? Is there a standardized specification?
A: The handle diameter is a universal specification (4mm, 6mm; ER11), allowing compatibility with other brands of cutting tools. -
Q: How long can tool bits be used?
A: The usage time of the cutting tool will be influenced by the hardness of the material, speed, and method of engraving. I MCNC suggests users to record the usage time of each tool bits to facilitate the estimation of tool bits life. -
Q: Are there any other consumables besides cutting tools?A: Consumables mainly consist of tool bits, while other machine components are less prone to wear and can be replaced as needed.