Steps for replacing the fuse
- Remove the Fuse Cover:
Press the fuse cover tightly while turning it counterclockwise. This will allow you to take out both the fuse cover and the fuse. - Replace the Fuse:
Take the old fuse out and replace it with a new one that has the same specifications as the original one supplied by the manufacturer. - Reinsert the Fuse Cover:
Insert the new fuse and the fuse cover back into the fuse holder. Press the cover tightly while turning it clockwise to secure it in place.
Check the Machine:Turn on the machine’s power to verify if the machine operates correctly.
Maintenance and Calibration
Regularly clean and lubricate the silver rails for smooth operation and longevity.
Clean the worktable surface after each machining operation. For general maintenance, clean and check the three axes every 1 to 3 months, depending on usage frequency.
No, the mini CNC engraver undergoes calibration and quality inspection before leaving the factory. Therefore, customers do not need to perform calibration upon receiving the machine.
After receiving the product, register on the Bravoprodigy official website. Once registered, you can download the user manual and software from the member area.